The design directives for the TorqueBox were clearly established in the early stages of development. This flagship gearbox had to have a 250 ft-lb torque capacity gearset but externally look like 400 ft-lb standing still. Development costs and resultant retail price were deemed irrelevant. By choosing the venerable 6-71 blower for architectural inspiration, we inadvertently gave rise to what is now trademarked as Function Formed™ design.
Enter the new PowerBox; Function Formed™ looks without the need to pawn your guns or your wife’s jewelry. Design inspiration from the TorqueBox coupled with a diamond ground 8620 steel 6-speed overdrive gearset gives the PowerBox an input torque capacity of 165 ft-lb, with a 400 ft-lb curb appeal; some may argue more. More because the tidy compact design of the PowerBox makes the function Formed design elements pop out more. 34Ds will always be noticed more on a petite chick than a larger chick; same concept.
-
Hydraulic clutch actuator only.
-
No neutral switch hole in the top cover
-
Speedometer hole for LSD or RSD
-
LSD version fits 1984-99 Softail and Custom frames
-
RSD version fits 1984-99 Softail-based RSD bikes and custom Softail-based RSD bikes
-
Hydraulic actuator with 1.5” piston standard. 11/16” master cylinder recommended
-
RSD comes with choice of 29 tooth zero offset pulley or 24 tooth .2” chain sprocket
-
RSD can be upgraded with various offset chain sprockets and sizes to suit application. No pulley option available due to tight actuator spider size
-
LSD comes with choice of 32 tooth pulley or 24 tooth .2” chain sprocket
-
LSD can be upgraded to all pulley and chain sizes and offsets to suit application
-
No neutral switch for clean look
-
No cost upgrade to N1 drum
-
Speed sensor provision located on back of case requires .120 spacer
-
12 point stainless steel ARP fasteners
-
Choice of standard and ‘R’ ratio gearsets
-
Standard ratio gears 1st through 6th: 2.94, 2.21, 1.60, 1.23, 1.00, .86
-
R-Ratio gear ratios 1st through 6th; 2.82, 2.08, 1.60, 1.23, 1.00, .86